EST-26 Multilite Transparent mineral silicate
Mineral potassium silicate EST-26 Multilite for pigmentation of mineral bases and additive for mortars of the ESTonetex System. Great consolidating effect by penetrating directly on the mineral base, 100% breathable and compatible with humidity.
EST-26 Multilite transparent is a mineral potassium silicate with great consolidating and penetrating power in mineral bases and mortars, totally breathable. It can be used for pigmentation by mixing it with Mixol dyes, to add the ESTonetex Restaura and ESTonetex Extreme txt mortars, and to consolidate mineral bases.
In pigmentation, it is applied in a proportion of 2% Mixol per 1 L of EST-26 Multilite (20 ml), up to a maximum of 4% Mixol per 1L of EST-26 Multilite (40 ml).
As a consolidant, it can be applied neat or a solution of 1 part of product for 3 of water (1 to 3).
-Plastic container of 10 L.
-Dimensions: 22 x 18 x 32 cm.
-The mineral potassium silicate EST-26 Multilite is a multifunction compound exclusively for use in mineral bases and mortars. It provides a consolidating effect thanks to the chemical silicification process, by which it establishes insoluble chemical bridges with the mineral products that fuse it with the mineral base.
-To pigment mortar or mineral bases.
-As an additive to the thematic mortars ESTonetex Restaura and ESTonetex Extreme.
-To waterproof and consolidate supports.
-The base where you intend to apply must be clean and dry.
-In the ESTonetex Restaura thematic mortar, a mixture of 1 part of EST-26 Multilite to 6 parts of water must be made.
-In the ESTonetex Extreme thixotropic mortar a mixture of 1 part of EST-26 Multilite to 5 parts of water must be made.
-To achieve a wide range of colors when tinting, EST-26 Multilite can be mixed with Mixol dyes, to achieve the desired color.
-As a consolidator in the restoration of historical heritage and bio-construction, it can be applied directly to the mineral base.
Recommendations for use:
-Do not apply on frozen surfaces or with risk of snowfall in the 24 hours following the application of the product.
-It is not recommended to apply it in areas where the sun touches a lot.
-Application recommended in temperatures between 5 and 35 ºC
How to use:
-To mix with mortar, make the proportion with water for the work that is needed and mix it with the mortar.
-To tint, make the mixture with the desired Mixol, and apply it with a Sprayer-EST or with a brush.
-To consolidate, mix with the necessary water, and apply with an EST-Sprayer or with a brush.
-Keep in a dry place that does not have direct contact with the sun.