EST-19 pure acrylate resin
Resin in aqueous dispersion of pure acrylates and polyurethanes, to improve the resistance, compaction and impermeability of mortars.
Polyurethane resin and pure acrylates to improve the physical qualities of the mortar. Adding the ESTonetex-Restaura mortar and the EST-19 resin, the ESTonetex-ForteMix thin-bed mortar for porexpan is obtained.
Ideal for regulating the absorption of ceramic surfaces (thermo-clay, brick, gero, tochana, etc.) prior to their coating with mortar for decoration or theming.
-Plastic container of 5 and 10 L.
-Dimensions 5L: 19 x 14 x 28 cm
-Dimensions 10L: 22 x 18 x 32 cm
-It is a resin in aqueous acrylic-polyurethane dispersion that improves the physical qualities of mortars.
-As an additive to the ESTonetex-Restaura mortar, to obtain the thin-bed mortar on ESTonetex-ForteMix polystyrene.
-As an additive to ESTonetex mortar, to obtain greater hardness, the mixture must be carried out in the appropriate proportion with water.
-As a regulator for ceramic surfaces.
-The base must be completely clean and dry.
-Consult in the technical data sheet the proportions of water and hands necessary for its use as a concrete protector.
-As an absorption regulator on thermoclay surfaces in theming work, apply a mixture of 1 part of EST-19 and 8 parts of water on the surface.
Recommendations for use:
-Do not apply on frozen surfaces or with risk of snowfall in the 24 hours following the application of the product.
-It is not recommended to apply it in areas where the sun touches a lot.
-Recommended application temperature, from 5 to 30ºC.
-Keep in a dry place that does not have direct contact with the sun.