Oxydizer Oxidizing Cleansing Gel
Gel format cleaner to remove shadows, traces of graffiti and marker marks due to oxidation.
-1 component oxidizing cleaner used for the final and punctual removal of graffiti shadows that remain after graffiti cleaning, especially in the case of markers, and on polished marble. The remaining graffiti pigments are dissolved by the Oxydizer oxidation process, and the shadows disappear. Applicable on surfaces resistant to oxidation.
-1L plastic container.
-Graffiti shadow remover on mineral bases, such as stone or brick.
-From 100 ml to 400 g/m² approx.
Recommendations for use:
-Do not apply on icy surfaces or surfaces at risk of snowfall in the 24 hours following the application of the product.
-It is not recommended to apply it in areas of humid bases or with draughts.
How to use:
-For the removal of remaining color pigments (shadows), especially ink and markers, after prior and complete removal of graffiti. Product ready for use, it must not be diluted or altered.
Lacquers, enamels and plastics (resistant to solvents) are generally not attacked. The oxidizing gel must be applied with a plastic brush, on the dry substrate stained with graffiti (Edding ink and pens) or graffiti shades.
The product works independently until it is almost completely removed. During the reaction time, which is usually 6 to 12 hours maximum, the treated surface should be covered with a plastic sheet. After the reaction, wash the surfaces with water and then with EST-12.
With a little ink and Edding pens, the Oxidizing Gel can be applied directly without pre-treatment. Pre-removal of graffiti on mineral, painted or protective coated surfaces can be done with Liquid and Cracker graffiti removers individually or in combination). When removing shadows from graffiti and applying Oxydizer Gel directly to ink and markers, it may be necessary to repeat the application process to remove all graffiti.
-In the original closed container, in a cool place protected from frost and for a maximum of 24 months.