EST-Graffi Protect anti-graffiti protector
EST-Graffi Protect is a renewable anti-graffiti based on waxes and paraffins to protect painted facades, it prevents graffiti and dirt from adhering to the base. With pressurized hot water, the protection and the graffiti that it has received on it is removed, and it must be applied again.
EST-Graffi Protect is a colorless, solvent-free, renewable surface protector, satin, formulated based on microemulsions of waxes and paraffins, to protect against graffiti, paints and synthetic mortars on facades.
It creates a thin, breathable, protective layer that prevents graffiti, graffiti and dirt from adhering to the base, while offering a notable improvement in water-repellent capacity.
-Plastic container of 5L and 10L.
-EST-Graffi Protect is especially indicated to apply on facade paints and synthetic plasters and prevent the graffiti from adhering to the existing base.
-It has a yield of between 6 to 10 m2 with an approximate consumption of 75 - 150 ml/m2.
- Graffiti can be removed with pressurized hot water (+80ºC) and accelerated with Facade cleaners such as FK-111 or graffiti cleaners such as macs Liquid or Cocopaste. In this way the protective film is removed, and with it the graffiti. After cleaning, the protector should be applied again.
Recommendations for use:
-Do not apply on icy surfaces or surfaces at risk of snowfall in the 24 hours following the application of the product.
-The surface to be treated must be between 5 and 25 ºC.
-Once the product has been applied, the surface must be protected from rain within 5 hours of application.
How to use:
-Protect well all surfaces that should not be treated or splashed. The product is ready to apply, although it can be diluted up to 10% with water. Before opening the container, shake it vigorously to obtain a homogeneous liquid. It is recommended to apply it with airless, roller or brush. It must be applied from the bottom up to prevent the material from sagging and leaving marks. The first coat will be given abundantly, but without material falling off. On the slightly damp base the 2nd coat is applied. These are applied relatively often working on wet.
-In the original closed container, in a cool place protected from frost and for a maximum of 12 months.