Revocadora de 3 salidas
1 and 3 way mortar machine, comes with a plate to cover two holes, for mortar or plaster projection.
-The mortar sprayer are used to spray mortar on all types of surfaces. Using the mortar saprayer saves significant time on site and no material is wasted. A specialized person is not needed for its use.
-The mortar srpayer connected to the compressor and loaded with mixture, manage to apply the projection at a speed and adherence impossible to achieve with manual projection.
-Also allow the projection simulating stone or brick more economically, with a yield of 60 m2 per hour with a thickness of 1 cm.
-Good and fast cleaning, easy maintenance.
-The mortar sprayer should preferably be used with single-phase 220V 3hp belt or continuous air compressors, minimum recommended air output 380 l / min.
-They can be used to make fine plaster coatings, thick plaster, interior walls, facades, party walls, ceilings, etc.
-To grout with all kinds of sand mixed with cements, mortars, plasters, lime, clay and others, in stone walls, brick etc ... .. Great filling capacity.
-With its application, a performance similar to that of 3 people is achieved, in addition to greatly speeding up work, much more material is saved than projecting it by hand.
-A smooth upward movement is recommended when applying the mortar sprayer to get the most out of plaster.
Maintenance and cleaning:
-Immerge the mortar sprayer in water and press the trigger several times during work.
-Remove the side screws at least once a week for complete cleaning.