UP-SIRIUS PLUS, plastering machine
UP-SIRIUS PLUS is one of the best mortar and plaster spraying machines on the market, available in 230 V and 480 V, thanks to its size it can be transported very comfortably, and it can be disassembled in seconds. Suitable for spraying mortars and plasters both wet and powder.
-Compact and easy to handle mixing pump, indicated for the application of all interior and exterior plasters. Suitable for machines or also for glue and reinforcement mortars.
-The UP-SIRIUS PLUS mixer can be filled with both bagged and pasty materials. For optimal adaptation to the desired material, the pump power can be conveniently regulated in 4 levels. For materials that are difficult to mix, a rear mixer is optionally available.
-It has wedge locks, simple and quick to handle with which the change of the important elements is done in a few seconds.
-The UP-SIRIUS PLUS with mortar mixing pump removes in seconds with just two movements, allowing it to be transported quickly from plant to plant. The small mixing pump impresses with its high power and integrated theft protection. The UP-SIRIUS PLUS electrical box can be easily removed and stored after work has been completed.
-Mixing pump, including compressor with automatic disconnection device and water pump, rotor / stator, spray lance and set of hoses and accessories.
-Able to work in single or three phase, the UP-SIRIUS PLUS is suitable for the transformation of both dry mortars and wet pre-mixed products. Quick removal of the shirt is an option that makes working with the UP-SIRIUS PLUS a pleasure.
-The UP-SIRIUS PLUS with mortar mixing pump can be used for practically any pumpable dry mortar process, bonding - such as compounds and adhesive mortars. It is also recommended for the manual process of dry materials, as well as the fully automatic delivery of a silo. Application areas include lime and lime-cement based interior and exterior plasters, sanitizing plasters, scratched plasters, receiving plasters and leveling putties, as well as especially the application of adhesives in integrated thermal insulation systems and the integration of tissues.
-Txt mortars, monolayers, lime mortars, plastering mortar, plasters, pre-mixed wet mortars, paving mortars, and other additive mortars can be projected.
Cleaning and maintenance:
-Very easy to clean, and does not require tools or special products for maintenance.
-After using the machine, you must clean the remaining material inside the machine with water, clean the machine with water and pass the ball to it. It is highly recommended to clean the water filter daily and disassemble the jacket to remove the material that remains stuck in the bowl.