110 gr fiberglass mesh Regarsa
Roll of fiberglass mesh of 110g / m2 of 10 x 10 mm for reinforcement of all types of mortars and plasters or coatings both indoors and outdoors. Highly recommended for thixotropic mortars, lime mortars, cementitious mortars, etc. Prevents the appearance of fissures and cracks.
And for the creation of artificial rock structures and waterfalls for subsequent coating with mortar, replacing the galvanic mesh.
Roll of fiberglass mesh to prevent the appearance of fissures or cracks in walls, surfaces and in rock or waterfall structures. It has great adhesion, alkali resistant and is non-corrosive. It avoids problems of oxidation and expansion produced by the galvanic mesh, in addition to its installation is easier. Great resistance and manageability.
-50 m2 fiberglass mesh of 110g / m2 - 10 x 10 mm.
-Place during the first layer of mortar when it is still tender. Then apply another layer on top or grate it before the material dries.
-Apply a first layer of mortar, let it dry, and then apply another layer with the desired load.
-They are suitable for any type of mortars, plasters, plasters, thematic mortars, cementitious mortars, lime mortars, monolayers, renderings, pavements, etc.
Recommendations for use:
-It is advisable to previously cut the meshes to place them more easily.
How to use:
-Place the mesh on the first layer of material and cover it completely.
-Place the mesh on the structure, apply a first coat of mortar, and when it has dried apply the second with the load that is needed.