Fiberglass mesh 330 gr Regarsa
Fiberglass mesh of 330 gr/m2 of 6x6 mm for the creation of rock, waterfall or stone structures for subsequent coating with mortar. Replacing the galvanic mesh, avoiding oxidation and expansion problems. It prevents the appearance of fissures and cracks, and improves the adhesion of the mortar.
It also serves as a reinforcement or replacement of another mesh in skirting boards covered with the ETICS system.
Description:
Roll of fiberglass mesh of 330 gr / m2 Regarsa, special for theming and SATE, to prevent the appearance of fissures or cracks in rock structures or waterfalls. It has strong adhesion, alkali resistant, non-corrosive and non-rotting. It avoids problems of oxidation and expansion produced by the galvanic mesh, in addition to its installation is easier. Great resistance and manageability.
It can also be used for reinforcement in exposed high-voltage areas such as baseboards in SATE system applications.
The square meter has a cost of € 3.96 + VAT.
Measures:
-Fiberglass mesh of 25 m2 of 330 gr/m2 - 6x6 mm.
-Dimensions: 15 x 15 x 100 cm - 7 kg
Applications:
-Apply a first layer of mortar, let it dry, and then apply another layer with the desired load.
Supports:
-They are suitable for any type of mortar: cementitious mortars, adhesive mortars, mortars for theming, etc.
Recommendations for use:
-It is advisable to previously cut the meshes to place them more easily
How to use:
-Place the mesh on the structure (with staples, ties or wire), apply a first coat of mortar, and when it has dried apply the second with the load that is needed.
-In the SATE system, apply a first layer of mortar, place the mesh and cover it again with mortar.
Storage:
-Keep in a dry place that does not have direct contact with the sun.
Grade Comments (0)