Fiberglass mesh 145 g
145g / m2 fiberglass anti-crack mesh for reinforcement of all types of mortars and plasters or coatings both indoors and outdoors. Highly recommended for thixotropic mortars, lime mortars, cementitious mortars, etc. Prevents the appearance of fissures and cracks.
4x4.5 mm mesh light, also used to create structures for later mortar coating. Replacing the galvanic mesh, avoiding oxidation and expansion problems.
Fiberglass mesh to prevent the appearance of fissures or cracks on surfaces and surfaces. It has great adhesion, alkali resistant and is not corrosive.
And to prevent the appearance of fissures or cracks in structures. It avoids oxidation and expansion problems caused by the galvanic mesh, in addition to its easier placement.
-50 m2 fiberglass mesh of 145g / m2 - 4 x 4.5 mm.
-Place during the first layer of mortar when it is still tender. Then apply another layer on top or grate before the material dries.
-Apply a first layer of mortar, let it dry, and then apply another layer with the desired load.
-They are suitable for any type of mortar and plaster, thematic mortar, cementitious mortar, lime mortar, monolayers, plastering, paving, etc.
Recommendations for use:
-It is recommended to pre-cut the meshes to place them more easily.
How to use:
-Place the mesh on the first layer of material and completely cover it.
-Place the mesh on the structure, apply a first coat of mortar, and when it has dried, apply the second coat with the required load.