Mixol (4) Red Oxide
Universal dyes Mixol Red Oxide (4), for pigmentation of mineral bases, performs a much more realistic pigmentation than other acrylic pigments or plastic paints. They are breathable and with a totally mineral finish color, it can be mixed with mineral silicate EST-26 Multilite, EST-Multipol or EST-Monocrom or other mineral bases. Suitable for indoor and outdoor work.
Mineral pigments Mixol Red Oxide dyes (4), to pigment or dye mineral bases such as thematic mortars, lime mortars, plastic paints, enamels, microcement, resins, etc.
It is applied in a proportion of 2% (20 ml) of Mixol per 1 L of mixture, up to a maximum of 4% (40 ml) of Mixol per 1L of mixture.
-They are available in 200 ml and 500 ml containers.
-Dimensions 200 ml: 7.5 x 3.5 x 14 cm
-Dimensions 500 ml: 9 x 9 x 15 cm
-Suitable for mixing with additives from the ESTonetex System.
-It can also be mixed with water, paints or lacquers to pigment other elements, such as microcement, wood or other coatings.
-The base must be dry and clean.
-The final color of the pigment is observed when it has dried. Depending on the weather it can be 2 to 3 days.
Recommendations for use:
-Perform a color and drying test before application.
How to use:
-Mix with EST-26 Multilite, EST-MultiPol, EST-Monocrom or another material, and apply with Spray-EST, or with a brush, depending on the job.
-Keep in a dry place.