EST-7 water-repellent desiccant
Water-repellent desiccant liquid concentrated in micro-nano emulsion of silanes-siloxanes dilutable to water for absorbent mineral bases, ideal for restoration of heritage and rehabilitation of facades. Prevents the appearance of salts, microorganisms, and fungi; and acts as a desiccant on wet bases.
Water repellent for absorbent mineral bases, such as thematic mortar, natural stone, mineral coatings, absorbent ceramics, etc. Ideal for restoration of historical heritage and renovation of coatings. Applicable on facades, ceilings, interior and exterior cladding, floors, etc. Protects the surface from wear due to humidity or environmental factors.
It must be applied with a solution of 1 part of EST-7 for 14 parts of water. (1 to 14)
-Plastic container of 1, 5 and 10 L.
-Dimensions 1L: 9 x 9 x 20 cm
-Dimensions 5L: 19 x 14 x 28 cm
-Dimensions 10L: 22 x 18 x 32 cm
-Next generation consolidating mineral water-repellent concentrate, with great penetration power and great resistance to alkalinity.
-The most advisable thing is to use a sprayer, since in this way it penetrates the entire surface, although if the surface is very small and very difficult to adhere to, a brush can be used.
-The surface must be completely dry and clean.
-The liquid has a milky color, but its finish is colorless.
Recommendations for use:
-It is advisable not to apply it in areas where the sun touches a lot.
-The second coat must be applied before the first dries, since then it may not penetrate. Two hands in one.
-Recommended application temperature, from 5 to 30 ºC.
-Keep in a dry place that does not have direct contact with the sun.