Machine products
Which spare parts and accessories are available for spraying machines?
Machine products are the wear parts, accessories and consumables for mortar and plaster spraying machines: worm pumps, rotors, lubricant, nozzles, filter and cleaning parts. The category groups 11 products:
- D5-2.5 Worm Pump 230V and Rotor D5-2.5 230V: for single-phase 230 V machines of the EST-SIRIUS PLUS type; approximate flow of 25 l/min at 400 rpm and aggregates up to 3 mm.
- D6-3 Worm Pump 400V and Rotor D6-3 400V: for three-phase 400 V machines; approximate flow of 20 l/min at 400 rpm and aggregates up to 3 mm.
- Worm Pump Spray: 400 ml spray to fit the worm pump and rotor; it does not stick to mortar or plaster.
- 30 mm Sponge Ball: to clean mortar or plaster residue from inside the hose.
- Conical Rubber Nozzle: for spray lances, with 12 and 14 mm outlets.
- Water Filter, Flat Rubber Gasket, Single-Phase Solenoid Valve 230V and Round File: auxiliary parts of the machine.
Frequently asked questions
Which worm pump and rotor do the EST-SIRIUS PLUS machines use?
The D5-2.5 Worm Pump 230V and the Rotor D5-2.5 230V are for single-phase 230 V machines of the EST-SIRIUS PLUS type. For three-phase 400 V machines, the D6-3 Worm Pump 400V and the Rotor D6-3 400V. The machines are in Machines.
What is the lubricant spray for?
The Worm Pump Spray is used to fit the worm pump and rotor in single-phase and three-phase machines; it is long-lasting and does not stick to mortar or plaster, which prevents blockages inside the pump.
How is the spraying hose cleaned?
The 30 mm Sponge Ball removes mortar or plaster residue from inside the hose, and the Round File (27 cm) is used to clean the air tube.
What does the solenoid valve do?
The Single-Phase Solenoid Valve 230V regulates the supply from the water pump to the mixer in single-phase spraying machines.