Previous
Next

Mesh 110 gr

Applications

•  Reinforcement of mortars, renders and coarse-aggregate mortars (one-coat renders, roughcast, lime, cement and theming mortars), indoors and outdoors

•  Reinforcement of ESTonetex TXT and Park mortars

•  Prevention of cracks and fissures in walls and surfaces

Technical specifications

Reference1301
Weight110 g/m²
Mesh size10 x 10 mm
MaterialFibreglass, alkali-resistant and non-corrosive
ColourWhite
Roll size50 m long x 1 m wide
Area per roll50 m²
PackagingRoll

Data from the ESTecha 2026 catalogue and the product's previous data sheet. Full technical documentation is available on request through the contact form.

Which mortars is it used with?

It is suitable for any type of mortar, plaster or render with coarse aggregate: theming, cement and lime mortars, one-coat renders and roughcast. In the ESTonetex System it is an ideal mesh for the thixotropic mortars TXT and Park. For ETICS systems and fine-aggregate mortars, the catalogue indicates the Tramaglass 145 g/m² mesh and the 160 g/m² mesh for ETICS.

How is it installed?

On walls: it is laid in the first coat of mortar while it is still fresh and fully covered; another coat is then applied on top, or the surface is scored before the material dries. It is advisable to pre-cut the mesh into pieces so that it is easier to install.

Observations and precautions

The mesh must be completely covered by the mortar. Professional-use material.

Complementary materials

•  TXT and Park: thixotropic mortars for which this mesh is intended

•  EST-Mesh 80 g/m²: 80 g/m² mesh with the same indication in the catalogue and a lower weight

•  330 g/m² mesh: mesh to cover iron-rod structures in artificial rocks and waterfalls

•  Tramaglass 145 g/m² mesh and 160 g/m² mesh for ETICS: meshes for fine-aggregate mortars, ETICS systems and applications on EPS and XPS

Frequently asked questions

What is the 110 g/m² fibreglass mesh used for?
To reinforce mortars, renders and coarse-aggregate mortars, help reinforce surfaces and prevent the appearance of cracks and fissures.

Which mortar goes with the 110 g/m² mesh?
It is an ideal mesh for TXT and Park mortars, and suitable for any mortar, plaster or render with coarse aggregate. For fine-aggregate mortars the 145 and 160 g/m² meshes are used.

How many square metres does a roll cover?
Each roll is 50 m long by 1 m wide, i.e. 50 m². The area actually covered depends on the overlaps and cut-offs on each job.

What is the difference between this mesh and the other meshes in the range?
The weight, roll format and application differ. The 110 g/m² mesh and EST-Mesh 80 g/m² (80 g/m²) have the same indication in the catalogue (mortars, renders and coarse-aggregate mortars; ideal for TXT and Park), a 50 m x 1 m roll and a 10 x 10 mm mesh size; the weight is what changes. The Tramaglass 145 g/m² mesh and the 160 g/m² mesh for ETICS (50 m x 1 m) are intended for ETICS systems and applications on EPS and XPS with fine-aggregate mortars. The 330 g/m² mesh (25 m x 1 m roll) is used to cover iron-rod structures in artificial rocks and waterfalls and as reinforcement in the lower areas of walls and façades. The 45 g/m² fibreglass tissue reinforces surfaces coated with stucco, filler or paint and repairs existing cracks.

Is fibreglass mesh needed with ESTonetex Fibrax or Forte?
With ESTonetex Fibrax, no fibreglass mesh is needed on the polystyrene. The ESTonetex Forte adhesion method on EPS/XPS does include mesh, and for polystyrene with fine-aggregate mortars the catalogue indicates the 145 and 160 g/m² meshes.

👉🏻 Remember that our shop is a DIGITAL CATALOGUE. You can request a quote if you are in Spain, or find our official international distributors.

Solicitud de presupuesto

También podría interesarte

You might also like