Previous
Next

Mesh 160 gr SATE

Applications

•  Reinforcement of the adhesive and decorative mortars of the ETICS system on EPS, XPS, rock wool and graphite EPS boards

•  Reinforcement of mortars, renders and fine-aggregate thin-layer mortars, indoors and outdoors

•  Reinforcement of microcements (follow the manufacturer's instructions)

•  Prevention of cracks and fissures in vertical surfaces, façades, walls and floors

Technical specifications

Reference1304
Weight160 g/m²
Mesh size3.5 x 3.8 mm
MaterialFibreglass, alkali-resistant and non-corrosive
Roll size50 m long x 1 m wide
Area per roll50 m²
PackagingRoll
Compatible insulationEPS, XPS, rock wool and graphite EPS boards

Data verified in the ESTecha 2026 catalogue. Full technical documentation is available on request through the contact form.

Which mortars is it used with?

It is suitable for the adhesive mortars of the ETICS system, microcements and fine-aggregate thin-layer mortars. In the ESTonetex System, the ESTonetex Forte adhesion method on EPS/XPS involves embedding a fibreglass mesh in the mortar itself. If you work with ESTonetex Fibrax, no fibreglass mesh is needed on the polystyrene. For the thixotropic mortars TXT and Park, and for TrabiCal, the recommended mesh is EST-Mesh 80 g/m².

How is it installed?

It is laid over the first coat of mortar while it is still fresh and fully covered with mortar. In ETICS it can be used both in the first coat of adhesive mortar and in the second coat of decorative mortar. For microcements, follow the microcement manufacturer's instructions. It is advisable to pre-cut the mesh into pieces so that it is easier to install.

Observations and precautions

The mesh must be completely covered by the mortar. Professional-use material.

Complementary materials

•  ESTonetex Forte: thin-layer mortar whose adhesion method on EPS/XPS includes a fibreglass mesh

•  EST-Mesh 80 g/m²: reinforcement mesh for TXT, Park and coarse-aggregate mortars

•  330 g/m² mesh: anti-vandal mesh for plinths and impact-prone areas in ETICS

Frequently asked questions

What is the 160 g/m² fibreglass mesh used for?
To reinforce ETICS mortars, microcements and fine-aggregate thin-layer mortars, and to prevent cracks and fissures on vertical surfaces, façades, walls and floors.

How many square metres does a roll cover?
Each roll is 50 m long by 1 m wide, i.e. 50 m². The area actually covered depends on the overlaps and cut-offs on each job.

Which insulation materials is it compatible with?
With expanded polystyrene (EPS), extruded polystyrene (XPS), rock wool and graphite EPS boards.

What is the difference between this mesh and the other meshes in the range?
The weight, roll format and application differ. EST-Mesh 80 g/m² (80 g/m², 50 m x 1 m roll) is intended for mortars, renders and coarse-aggregate mortars, and is the one recommended for TXT and Park. The 145 g/m² mesh (50 m x 1 m) and this 160 g/m² mesh are intended for ETICS systems and applications on EPS and XPS with fine-aggregate mortars; the 160 g/m² one has the higher weight of the two. The 330 g/m² mesh (25 m x 1 m roll) is an anti-vandal mesh for rock and waterfall structures and for exposed areas such as plinths. The 45 g/m² fibreglass tissue is used to reinforce surfaces coated with stucco, filler or paint and to repair existing cracks.

When is the mesh installed in ETICS?
It is embedded in the first coat of mortar while it is still fresh and fully covered. It can be used in both the first coat of adhesive mortar and the second coat of decorative mortar.

Is this mesh needed with ESTonetex Fibrax?
No. ESTonetex Fibrax is a super-fibre primer that avoids the need for fibreglass mesh on polystyrene. With ESTonetex Forte, however, the adhesion method on EPS/XPS does include mesh.

Is it suitable for plinths and impact-prone areas?
For plinths and areas exposed to high stress, there is the 330 g/m² mesh, an anti-vandal type that, according to its technical data sheet, can be used together with or instead of other façade meshes.

👉🏻 Remember that our shop is a DIGITAL CATALOGUE. You can request a quote if you are in Spain, or find our official international distributors.

Solicitud de presupuesto

También podría interesarte

You might also like