ESTonetex TXT

Applications

•  Regularization of interior and exterior walls

•  Ornamental façade elements: baseboards, cornices, frames, ashlar masonry

•  Decorative mineral-look façade coatings

•  Theming for gardens and theme parks

•  Decoration of hospitality spaces

•  Reproduction of stone, rock, brick, log and wood

Technical specifications

Full technical documentation and certificates available on request via the contact form.

Supports

Direct application on brick or thermo-clay, concrete block, rendering or expanded metal. On plasterboard, concrete, paint or plaster, the surface must be treated beforehand. Supports must be clean, hard and cohesive, and should be dampened before application, especially in hot or windy weather.

How is ESTonetex TXT mixed?

Mix with 4.5 to 5 L of water until a homogeneous paste is obtained. It is recommended to let the material rest for 5 minutes before applying.

How is it applied?

Spray with a plastering machine, or spread by hand, applying the necessary material to the surface to be worked. Mould with molds, Japanese trowels or steel spatulas. Scratch the mortar before it dries. For thicknesses above 5 cm, apply in several layers: a first base layer, scratch it, and apply the next layer once the first has hardened.

Observations

On metal structures covered with armor, apply a first, denser layer of ESTonetex to prevent it from penetrating through the mesh holes. At structural joints, joints between different materials, or large thicknesses, it is advisable to incorporate a reinforcing mesh to prevent cracking. Do not apply on frozen surfaces or with risk of snowfall in the following 24 hours, nor when heavy rain is forecast.

Pigmentation

Can be pigmented with powder patinas or with mineral silicate and mineral pigments.

Complementary materials

•  EST-Mesh 80 g/m²: reinforcing fiberglass mesh, recommended between layers

•  EST-3 Plus: mineral water repellent for extra moisture protection

•  EST-Decor: powder patinas for decorative finishes

•  EST-Desmoldeante: release agent for silicone, resin or PVC molds

•  EST-26 Multilite: consolidating mineral silicate, also used for pigmentation

•  Mixol dyes: universal mineral dye for pigmenting the mortar

FAQ

What temperature can ESTonetex TXT be applied at?
Between 5 °C and 30 °C. Do not apply on frozen surfaces or with risk of snowfall in the following 24 hours.

How much water does ESTonetex TXT need for mixing?
Between 4.5 and 5 litres of water per 25 kg bag, until a homogeneous paste is obtained.

Is ESTonetex TXT fire resistant?
Yes, it has Euroclass A1 certification (non-combustible material), verified in the official technical data sheet.

Can ESTonetex TXT be applied outdoors?
Yes, it is suitable for both indoor and outdoor use, as long as it is not in continuous contact with water (aquariums, waterfalls, fountains).

What is the difference between ESTonetex TXT, Park and Sulfo mortars?
TXT is the thixotropic mortar for carving and modelling large volumes (1 to 20 cm, in several layers). ESTonetex Park is applied at 1 to 6 cm and is designed for large surfaces with high on-site productivity. ESTonetex Sulfo is sulphate-resistant, for contact with salt or chlorinated water (pools, waterfalls, fountains).

What colours is ESTonetex TXT available in?
Sandstone, white and grey. It can also be pigmented with powder patinas (EST-Decor) or with mineral silicate and mineral pigments (Mixol dyes).

How much ESTonetex TXT mortar is needed per square metre?
As a minimum recommendation, 13.5 kg/m² for every centimetre of thickness, depending on the surface. A 25 kg bag therefore covers approximately 1.85 m² at 1 cm thickness.

Can ESTonetex TXT be sprayed with a machine?
Yes. It can be sprayed with a machine or plastering machine, or applied by hand. It is then shaped with moulds, Japanese trowels or steel spatulas, and scraped before it dries.