Mesh 330 gr
Applications
• Covering of iron-rod structures for creating artificial rocks, waterfalls and stones, before coating with mortar
• Replacement of galvanised mesh in these structures, avoiding oxidation and expansion problems
• Reinforcement of areas exposed to high stress levels, especially plinths, together with or instead of other façade meshes
• Reinforcement of the lower areas of walls and façades in ETICS applications
Technical specifications
| Reference | 1305 |
| Name in the technical data sheet | Tramaglass 330 R275 |
| Type | Anti-vandal fibreglass mesh, half-leno weave |
| Weight | 330 g/m² |
| Roll size | 1 m (100 cm) wide x 25 m long |
| Area per roll | 25 m² |
| Packaging | Roll |
| Mesh size | 5.9 x 6.0 mm |
| Thickness | ± 0.90 mm |
| Linear density | Warp: 204 tex · Weft: 1,200 tex |
| Tensile strength | Warp: ≥ 3,800 N/5 cm · Weft: ≥ 3,500 N/5 cm |
| Tensile strength after 28 days in a 5% sodium hydroxide solution | Warp: ≥ 1,000 N/5 cm · Weft: ≥ 1,000 N/5 cm |
| Elongation | Warp: 5.0% · Weft: 5.0% |
| Elongation after 28 days in a 5% sodium hydroxide solution | Warp: 3.5% · Weft: 3.5% |
| Properties | Highly resistant to impact and alkalis; protection of areas at risk of damage |
| Certification | Certified according to ETAG 004 (per the technical data sheet) |
Data verified in the official technical data sheet. Full technical documentation is available on request through the contact form.
Which mortars is it used with?
It is suitable for any type of mortar: cementitious, adhesive or theming mortars. To coat rock and waterfall structures, the ESTonetex System offers thixotropic mortars such as TXT, Park and Extreme (also Extreme SR-MR). In ETICS it is used with the system's adhesive mortar.
How is it installed?
On rock and waterfall structures: lay the mesh over the structure, fixing it with staples, cable ties or wire; apply a first coat of mortar and, once dry, the second coat with the aggregate load required. In the ETICS system: apply a first coat of mortar, lay the mesh and cover it again with mortar. It is advisable to pre-cut the mesh into pieces so that it is easier to install.
Observations and precautions
The mesh must be completely covered by the mortar. Professional-use material.
Storage
Store in a dry place, away from direct sunlight.
Complementary materials
• TXT / Park / Extreme: thixotropic mortars of the ESTonetex System for coating rock and waterfall structures
• 160 g/m² mesh for ETICS: reinforcement mesh for the rest of the façade in ETICS systems
Frequently asked questions
What is the 330 g/m² fibreglass mesh used for?
As a covering for iron-rod structures when creating artificial rocks and waterfalls, before applying the mortar, and as reinforcement in low and exposed areas of walls and façades, such as ETICS plinths.
What does anti-vandal mesh mean?
According to its technical data sheet, it is a mesh intended for reinforcing areas exposed to high stress levels, especially plinths. It is highly resistant to impact and alkalis, and can be used together with or instead of other façade meshes.
Does it replace galvanised mesh?
On rock, waterfall and stone structures it can be used instead of galvanised mesh, avoiding the oxidation and expansion problems of the latter, and it is easier to install.
Does it resist the alkalis in cement?
Yes. It is a highly alkali-resistant mesh: after 28 days in a 5% sodium hydroxide solution it keeps a tensile strength of at least 1,000 N/5 cm in warp and weft, according to its technical data sheet.
How many square metres does a roll cover?
Each roll is 25 m long by 1 m wide, i.e. 25 m². The area actually covered depends on the overlaps and cut-offs of the structure.
Which mortar is applied over this mesh?
It is suitable for any type of mortar. In theming, the mortar is applied in a first coat and, once dry, in a second coat with the aggregate load required; the ESTonetex System mortars include TXT, Park and Extreme.
How is it fixed to the structure?
It is laid over the rod structure and fixed with staples, cable ties or wire. Before installing it, it is advisable to cut it into pieces so it is easier to handle.
What is the difference between this mesh and the other meshes in the range?
The 330 g/m² mesh has the highest weight and is designed for rock and waterfall structures and for impact-prone areas, such as plinths. The 220 g/m² mesh has the same application on rod structures, but comes in 50 m rolls. EST-Mesh 80 g/m², the 145 g/m² mesh and the 160 g/m² mesh for ETICS are designed to reinforce mortars and renders (the 80 g/m² one with coarse aggregate and the 145 and 160 g/m² ones with fine aggregate and ETICS), and the 45 g/m² fibreglass tissue to repair cracks under stucco, filler or paint.
👉🏻 Remember that our shop is a DIGITAL CATALOGUE. You can request a quote if you are in Spain, or find our official international distributors.
Solicitud de presupuesto
-- or --