EST-Mixol (9) Blue

Applications

•  Pigmentation of EST-26 Multilite, EST-Multipol and EST-Monocrom

•  Mass pigmentation of mortars and microcements

•  Water-based or solvent-based paints, stains, glazes, varnishes, lacquers, coatings, stuccos and putties

Technical specifications

EST-Mixol is a concentrated universal pigment, easy to homogenise, with high concentration, resistance and compatibility. It can be stored for long periods and withstands frost and high temperatures without deteriorating. Full technical documentation is in the technical data sheet downloadable above.

How is it applied?

First check the compatibility of EST-Mixol with the product to be pigmented using a small sample. Shake the container vigorously before use, pour EST-Mixol onto the product to be tinted in the chosen proportion and mix well; an electric stirrer is recommended to ensure good dispersion and homogenisation. Indicative percentages: water-based paints up to 10%; lacquers and varnishes 5-8%; acrylic lacquers approx. 6%; transparent lacquers 3-5%; silicate or silicone paints approx. 3% (oxides only); mortars and microcements up to 10%; ESTonetex glazes (EST-26 Multilite, EST-Monocrom and EST-Multipol) maximum 4%, with oxides and metallics.

How is it dosed in mortars?

As a guide, per kg of mortar: the 10% line equals about 30 grams, the 4% line about 12.5 grams, the 2% line about 9 grams, the 1% line about 6.5 grams and the 0.2% line about 3 grams. It is advisable to add EST-Mixol to the mixing water or solvent before mixing with the mineral part, and to always carry out a trial first, since depending on the type of cements and aggregates in each mortar and the chosen colour these amounts may increase or decrease.

Compatibility

Compatible with EST-26 Multilite, EST-Multipol and EST-Monocrom, as well as a wide variety of paints, lacquers and coatings. In ESTonetex glazes the maximum EST-Mixol is 4% on the product, with oxides and metallics. EST-Monocrom accepts this tint, like the rest of the oxides and the metallics. EST-Mixol tints can be mixed together to create different shades. With special paints or lacquers, always carry out a prior compatibility and homogenisation test.

Observations

Before pigmenting, read the technical data sheet of the paint, mortar or coating: it may indicate limits on the pigmentation percentage. To check that EST-Mixol is properly homogenised, apply a little of the tinted product to a piece of paper and rub it with your finger: if the colour does not change, the mix is correct; if the tone gets stronger, mix again. Wear gloves, goggles and a mask; do not ingest or inhale. Professional product: always consult the safety data sheet before use.

Storage

Store for approximately 24 months in a closed container, in a cool, dry place. Expired product must be disposed of in accordance with current legislation.

Complementary materials

•  Mineral glazes to pigment with EST-Mixol: EST-26 Multilite Color, EST-26 Multilite Transparent, EST-Monocrom Transparent, EST-Monocrom Color, EST-Multipol Transparent, EST-Multipol Color. The Color versions have a colour chart: ask for the colour chart through the contact form

•  Other EST-Mixol tints: elite oxides (29) Elite black oxide, (30) Elite yellow oxide, (31) Elite green oxide, (32) Elite blue oxide; metallics Gold, Silver, Copper

•  More pigmentation products: see the Pigmentation category

Frequently asked questions

What is EST-Mixol (9) Blue used for?
To pigment the ESTonetex mineral additives (EST-26 Multilite, EST-Multipol and EST-Monocrom), mortars, microcements, paints, lacquers and varnishes.

What UV resistance does it have?
Level 12, the highest on the scale: it keeps its colour without fading after 5000 hours of Xenon exposure, approximately 5 years of sunlight. The technical data sheet states that these are indicative values, depending on climate, sun exposure, pigment concentration and the quality of the pigmented product.

What proportion is used?
Between 0.2% and 10% by weight of the product to be pigmented, depending on the type of material (for example, water-based paints up to 10%, lacquers and varnishes 5-8%, mortars and microcements up to 10%). In ESTonetex glazes the maximum is 4%, with oxides and metallics. See the technical data sheet for each specific application.

How much EST-Mixol should be added per kilo of mortar?
According to the colour chart: 10% line about 30 grams per kg of mortar, 4% about 12.5 g, 2% about 9 g, 1% about 6.5 g and 0.2% about 3 g. Add it to the mixing water before mixing with the mineral part and always carry out a trial.

Can it be used outdoors?
UV resistance level 12 is the highest on the scale. For outdoor use, silicate paints and highly alkaline products, the technical data sheet says to always use the EST-Mixol oxides (the red-cap ones); if you have doubts about this colour for your case, ask us through the contact form.

What can it be mixed with, and can it be mixed with other Mixol colours?
It is especially recommended for EST-26 Multilite, EST-Multipol and EST-Monocrom, and also works with water-based or solvent-based paints, lacquers, varnishes, mortars and microcements. EST-Mixol tints can be mixed together to create different shades. EST-Monocrom accepts this tint, like the rest of the oxides and the metallics.

How do the oxide, elite oxide and metallic Mixols differ?
No. 9 Blue is a stand-alone colour of the range, with UV resistance level 12 and a density of 1.17 kg/L. The elite oxides (no. 29 to 32) also include a blue (no. 32) with a higher density (2.10 kg/L). The metallics (Gold, Silver, Copper) are water-soluble paste concentrates added to colourless bases to give a metallic effect and are supplied by weight.

What packaging does it come in and what is the reference?
In 200 ml (REF 1125) and 500 ml (REF 1126) containers.

How long does it keep?
About 24 months in a closed container, in a cool, dry place. It withstands frost and high temperatures without deteriorating.