Previous
Next

EST-7

Applications

•  Restoration of historic heritage and facades, monuments and archaeological excavations

•  Water-repellent treatment of ESTonetex mortars, facing brick, natural stone, concrete, plasters, terracotta and absorbent ceramics

•  Primer before painting with silicate, casein or dispersion (breathable) paints

•  Facades already attacked by mould, fungi or algae, and concrete structures, where it also protects the internal reinforcement against corrosion

•  Wood and bases with capillary dampness

Technical specifications

Reference1203 (1 L) / 1204 (5 L) / 1205 (10 L)
Packaging1 L, 5 L or 10 L plastic container
ColourBetween yellow and brown in the container; colourless when dry
DensityApproximately 1.0
Sd valueApproximately 0.02 (does not affect the curing of the base)
Dilution1:14 in drinking water (general use); 1:10 for capillary dampness and wood
ConsumptionAverage of about 250 ml/m² of solution (between 100 and 500 ml/m², depending on the absorption of the base)
Application temperatureFrom 3 ºC (ambient and surface); ideal at 20 ºC and 60 % humidity
Drying timeBetween 4 and 24 hours; water-repellent and consolidating effect most effective after 2 to 5 days; after 3 hours rain no longer damages the work
Flash pointAbove 25 ºC
Shelf life24 months in a sealed container, in a cool place (5 to 25 ºC)

It protects against dampness and its consequences while allowing full vapour diffusion, and has excellent resistance to weathering and UV rays. It protects against the blooming of hygroscopic salts, chloride penetration and corrosion, repels dirt, enhances and maintains the natural colours of the surface, and has a prolonged effect against micro-organisms thanks to BioFilmStop technology (DIN-UNE EN 15457:2008). Full technical documentation is in the technical data sheet downloadable above.

Substrates

The base should preferably be dry and its pores completely clean, free of salts, micro-organisms, grease, release agents, waxes, lacquers or construction debris; it is recommended to apply it after cleaning the base (for example with EST-12), especially if this was done by sandblasting, because the base is left very receptive and unprotected. Suitable on brick, facing brick, natural stone, silica-calcareous and artificial stone, refractory brick, Ytong, concrete, plasters and mortars, wood, terracotta, pavements and ceramics, and in general on any porous material. Not recommended on polished bases with almost no absorption, extremely alkaline bases or fresh cement (for these, EST-3 Plus N), or on interior natural rock bases with internal rainwater leaching. On white mineral bases, bush-hammered stone or stone with low absorption, product left on the surface may cause yellowish stains: consult our technical service.

How is it diluted?

In general, dilute the concentrate in drinking water at a ratio of 1:14. For bases with capillary dampness and for wood, dilute 1:10. Mix only the amount to be applied that day: the mixture remains stable and applicable for 8-12 hours and must be used within 8 hours.

How is it applied?

Apply with a brush, roller, sprayer or by soaking the surface evenly without pressure, 2 to 3 coats, each over the previous one while still wet. Avoid leaving product residue on the surface, because dried unabsorbed residue causes yellowish stains: on low-porosity bases, remove it with a cloth before it dries (if it has already dried, it must be removed with the special cleaning solvent for EST-7). Clean the tools with water after use. You can watch the explanatory video on mineral water repellents.

For rising damp, it is suitable for application in drill holes in the wall; the technical data sheet indicates a consumption of 20 to 30 l/m³ of wall (with the concentrate diluted 1:14) and recommends requesting additional information before doing so.

Compatibility

•  ESTonetex mortars: the technical data sheet indicates its use for the water-repellent treatment of ESTonetex mortars

•  Paints: it can be used as a final finish or as a primer before silicate, casein or breathable dispersion paints; they can be applied 4 to 24 hours later, depending on temperature

•  Damp bases: it can be applied on a damp base by increasing the concentration or the number of coats

Observations and precautions

Mix only the amount needed for the day and do not apply the mixture after that time. Avoid dried residue on the surface, which stains yellow. Do not apply in areas strongly exposed to the sun. Application temperature from 3 ºC. Wear gloves, goggles and a mask; do not ingest or inhale. Professional product: always consult the safety data sheet before use.

Storage

Store for up to 24 months in a sealed container, in a cool place, at a temperature not below 5 ºC nor above 25 ºC. Protect the product from heat and avoid direct exposure of the containers to the sun. Once opened, close the container immediately after taking the amount needed and use only clean tools, so that no dust or dirt gets in. Expired product must be disposed of in accordance with current legislation.

Complementary materials

•  ESTonetex mortars: mortar range whose finish is made water repellent with this product

•  EST-12: detergent cleaner to prepare the base

•  EST sprayer: to apply the diluted product

•  EST-3 Plus N and EST-Multilitio: the oil-repellent water repellent and the consolidant of the range

Frequently asked questions

What is EST-7 used for?
To make absorbent mineral bases (facades, heritage, stone, mortars) water repellent and consolidate them, protecting them from damp, salts and the growth of fungi and micro-organisms, and to dry out damp bases.

What dilution ratio is used?
1:14 with drinking water for general use, and 1:10 for bases with capillary dampness or for wood.

Can it be applied on a damp wall?
Yes: it can technically be applied on a damp base by increasing the concentration or the number of coats, and on damp bases it helps to dry them out. Even so, the base should preferably be dry.

Can it stain the surface?
If unabsorbed residue is left on low-porosity bases and allowed to dry, yellowish stains may appear; that is why the excess must be wiped off with a cloth before it dries. On white mineral bases, bush-hammered stone or stone with low absorption, consult our technical service first.

How long does it take to work and when can it be painted over?
It dries in 4 to 24 hours; the water-repellent and consolidating effect is most effective 2 to 5 days later, and after 3 hours rain no longer damages the work. It can be covered with silicate, dispersion or breathable paints after 4-24 hours, depending on temperature.

What is its coverage?
Average consumption of the solution is about 250 ml/m², between 100 and 500 ml/m² depending on the absorption of the base; the technical data sheet recommends carrying out a preliminary test for each case.

Does it work against rising damp?
It is suitable for application in drill holes in the wall against capillary dampness; the technical data sheet recommends requesting additional information before doing so.

How does it differ from EST-3 Plus N and EST-Multilitio?
EST-7 is a drying, consolidating water repellent, designed for damp surfaces and heritage restoration. EST-3 Plus N is an oil-repellent water repellent that leaves no film and is recommended for fresh or highly alkaline cement. EST-Multilitio is a lithium silicate mineral consolidant, not a water repellent.

Which containers and references does it come in?
In plastic containers of 1 L (REF 1203), 5 L (REF 1204) and 10 L (REF 1205).

How long can it be stored?
Up to 24 months in a sealed container, in a cool place between 5 and 25 ºC and protected from direct sun. Once mixed with water, it must be used the same day.

👉🏻 Remember that our shop is a DIGITAL CATALOGUE. You can request a quote if you are in Spain, or find our official international distributors.

Solicitud de presupuesto

También podría interesarte

You might also like