EST-Multilitio
Applications
• Restoration of historic heritage, facade refurbishment and bio-construction
• Works and theming of the ESTonetex System: mortars and mineral bases that need consolidation
• Natural stone floors and polished concrete pavements, applied neat and with possible final polishing for a satin finish
• Concrete and almost any mineral base that must be consolidated effectively, durably and with high breathability
Technical specifications
| Reference | 1206 (1 L) / 1207 (5 L) / 1208 (10 L) |
| Packaging | 1 L, 5 L or 10 L plastic container |
| Colour | Colourless |
| Density | Approximately 1.03 |
| pH | Approximately 11.0 |
| Sd value | Below 0.02 m (high breathability) |
| Dilution | From neat (concrete) to 1:4 in water (especially in restoration) |
| Coverage | Between 5 and 15 m² per litre of concentrate, depending on the type of application and the absorption of the base |
| Gloss level | From mineral matt to crystalline satin, depending on the base and the concentration |
| Application temperature | From 5 ºC (surface and ambient) |
| Shelf life | 24 months in a sealed container, in a cool place (5 to 25 ºC) |
It is specially designed for exclusive use on mineral bases: thanks to its multiple silicification (petrification) process it becomes part of the base to which it is applied. Its water-based, organic-solvent-free formulation (Zero VOC) only requires the basic protection measures of a water-based product, unlike the complex safety measures of solvent-based silicate consolidating systems. Full technical documentation is in the technical data sheet downloadable above.
Substrates
For exclusive use on mineral bases: ESTonetex mortars, concrete, stone and mineral coatings, indoors and outdoors. For a good application the condition of the base must be taken into account; to prepare it, it can be cleaned first with EST-12. Before applying, cover all metal surfaces, glass, lacquered surfaces, wood and any other mineral surfaces that should not be treated.
How is it diluted?
It can be applied from neat (concrete) to a 1:4 dilution in water (especially in restoration). The degree of dilution and the number of coats depend on the porosity, absorption and state of degradation of the base and on its defects. If a strong consolidating effect is needed, apply it more concentrated, from neat to 1:2 in water.
How is it applied?
Apply with a brush, roller or sprayer. As a general rule in restoration, apply a first coat more diluted in water (1:4), especially on low-porosity, low-absorption mineral bases, followed by a definitive second coat. Given the wide variety of situations, a preliminary test is recommended: if after drying the sample a bright crystalline-whitish surface is obtained, repeat the test with a higher dilution in water.
Compatibility
• ESTonetex mortars and mineral bases: the technical data sheet indicates it for use with ESTonetex mortars and mineral bases indoors and outdoors
• Other products: do not mix with other products
• Moisture: it is compatible with moisture and lets the substrate breathe
Observations and precautions
It is a product exclusively for mineral bases. Always carry out a preliminary test to adjust the dilution. Wear safety glasses and skin protection, especially when working above head height. Do not apply on frozen surfaces or if snow is expected within the next 24 hours, or in areas with strong sun. Application temperature from 5 ºC. Professional product: always consult the safety data sheet before use.
Storage
Store for up to 24 months in a sealed container, in a cool place, at a temperature not below 5 ºC nor above 25 ºC. Protect the product from heat and avoid direct exposure of the containers to the sun. Once opened, close the container immediately after taking the amount needed and use only clean tools, so that no dust or dirt gets in. Expired product must be disposed of in accordance with current legislation.
Complementary materials
• ESTonetex mortars: mortar range that is consolidated with this product
• EST-12: detergent cleaner to prepare the base
• EST sprayer: to apply the product
• EST-7 and EST-3 Plus N: the water repellents of the range
Frequently asked questions
What is EST-Multilitio used for?
To consolidate mineral bases (mortars, concrete, stone, heritage): it reacts with the base and forms a single crystalline body with it, insoluble in water and highly breathable.
What dilution ratio is used?
From neat to 1:4 with water. In restoration it is usual to start with a first coat at 1:4; for a strong consolidating effect, between neat and 1:2. A preliminary test is always advisable.
Does it leave the surface glossy?
It depends on the base and the concentration: from mineral matt to crystalline satin, especially on concrete pavements with neat product and final polishing. If the test sample dries with a whitish shine, repeat it with more water.
Does it contain solvents?
No: it is water-based, free of organic solvents (Zero VOC) and biodegradable, so it only requires the basic protection measures of a water-based product.
Can it be mixed with other products?
No. The technical data sheet states that it must not be mixed with other products.
Which bases can it be applied on?
Only on mineral bases: ESTonetex mortars, concrete, natural stone and mineral coatings, indoors and outdoors. It is specially designed for natural stone and polished concrete floors.
What is its coverage?
Between 5 and 15 m² per litre of concentrate, depending on the type of application and the absorption of each base.
How does it differ from EST-7 and EST-3 Plus N?
EST-Multilitio is a consolidant: it hardens the mineral base from within and is breathable. EST-7 and EST-3 Plus N are mineral water repellents: they reduce water penetration (EST-7 also consolidates and dries out damp bases; EST-3 Plus N leaves no film and is oil-repellent).
Which containers and references does it come in?
In plastic containers of 1 L (REF 1206), 5 L (REF 1207) and 10 L (REF 1208).
👉🏻 Remember that our shop is a DIGITAL CATALOGUE. You can request a quote if you are in Spain, or find our official international distributors.
Solicitud de presupuesto
-- or --