EST-Desmoldeante
Applications
• Release of moulds and rollers when making printed coatings and pavements
• Stamped-concrete moulds and moulds for theming and high-end decoration
• Silicone, resin or PVC moulds
Technical specifications
| Reference | 1400 (5 L) / 1401 (25 L) |
| Packaging | 5 L or 25 L plastic container |
| Appearance | Clear liquid with a characteristic odour |
| Water solubility | Insoluble |
| Viscosity | 0.9 cps at 20 ºC |
| Flash point | 39 ºC (Setaflash) |
| Application temperature | 5 to 35 ºC |
| Theoretical yield | Approx. 15 m²/L |
| Shelf life | 24 months in a sealed container, in a cool place (5 to 25 ºC) |
Non-stick liquid for moulds and rollers: it allows immediate demoulding after application, has strong release properties and prevents efflorescence. Full technical documentation is in the technical data sheet downloadable above.
How is it applied?
Once the mortar has been spread over the surface to be textured, apply EST-Desmoldeante with an EST sprayer onto the mortar and onto the moulds or rollers, until fully covered. The chosen moulds and rollers are then used for the finish. Waiting times vary with temperature and humidity. After use, clean the mould.
Use it as supplied, undiluted. Do not use it if the mortar has excess water, and do not add water once the product has been sprayed.
Moulds
Moulds must be dry and clean.
Compatibility
• Printed coating and pavement mortars: it is applied onto the fresh mortar and onto the mould; it is the release agent indicated for ESTonetex Pavimento mortar and for moulds used with ESTonetex TXT
• Subsequent sealing: after application the substrates can be sealed directly provided no product residue remains; wait 3 to 4 days for it to evaporate (at least one week in poorly ventilated rooms)
Observations and precautions
Application temperature 5 to 35 ºC; do not apply if there is a risk of frost, rain, strong winds or direct sun. Wear gloves, goggles and a mask; do not ingest or inhale. Professional product: always consult the safety data sheet before use.
Storage
Store for up to 24 months in a sealed container, in a cool place at a temperature not below 5 ºC nor above 25 ºC. Expired product must be disposed of in accordance with current legislation.
Complementary materials
• ESTonetex Pavimento and ESTonetex TXT: mortars that are moulded or stamped with texture moulds
• Moulds: see the stone and rock moulds category
• EST sprayer: to apply the release agent onto the mortar and the moulds
Frequently asked questions
What is EST-Desmoldeante used for?
To prevent mortar from sticking to moulds and rollers when making printed coatings and pavements: stamped concrete, theming and high-end decoration.
Where is it applied: on the mould or on the mortar?
On both: with a sprayer, onto the mortar once spread and onto the moulds or rollers, until the surfaces are fully covered.
Can it be diluted in water?
No. It is insoluble in water and is used as supplied; do not add water once it has been sprayed, and do not use it if the mortar has excess water.
What is its yield?
According to the technical data sheet, the theoretical yield is approximately 15 m² per litre.
Can the surface be sealed or treated afterwards?
Yes, directly, provided no product residue remains: wait 3 to 4 days for it to evaporate, and at least one week in poorly ventilated rooms.
Which containers and references does it come in?
In plastic containers of 5 L (REF 1400) and 25 L (REF 1401).
How does it differ from EST-S Imprimer or EST-12?
EST-Desmoldeante does the opposite of a primer: it prevents the mortar from sticking to the mould. EST-S Imprimer is a bonding primer that improves the adhesion of the mortar to the substrate, and EST-12 is a detergent cleaner for damp damage.
How long can it be stored?
Up to 24 months in a sealed container, in a cool place between 5 and 25 ºC.
👉🏻 Remember that our shop is a DIGITAL CATALOGUE. You can request a quote if you are in Spain, or find our official international distributors.
Solicitud de presupuesto
-- or --