Knot stamp N3
Applications
• Adding tree knots to wood, beam and trunk textures on soft mortar
• Theming work and creation of textures in high-end decoration
• Complement to the wood stamps, rollers and kits in the range
Technical specifications
| Reference | 2015 |
| Type | Triple knot texture stamp |
| Measures | 10 × 34 cm |
| Flexibility | Semi-flexible |
This product has no technical data sheet: for any question about sizes, texture or compatibility, request information.
How is it used?
1. Spread the mortar over the surface to be textured.
2. Using the EST sprayer, apply EST-Desmoldeante onto the mortar and onto the knot stamp, until the surfaces are completely covered.
3. While the mortar is still soft, press the knot stamp onto the area where the wood knot is wanted.
4. Always clean the knot stamp after use, with a wire brush.
According to the EST-Desmoldeante technical data sheet: waiting times vary with temperature and humidity; the release agent application temperature must be between 5 and 35 ºC; do not use if the mortar has excess water, do not add water once it has been sprayed and do not apply if there is a risk of frost, rain, strong winds or direct sun; wear gloves.
Compatibility
• Moldable ESTonetex mortars: ESTonetex TXT (compatible with stamps according to the catalog), ESTonetex Park (compatible with molds), ESTonetex Sulfo and ESTonetex Extreme (carving and stamping) and ESTonetex Pavimento (anti-slip finish through texture or stamping). All of them in ESTonetex mortars
• Other mortars and substrates: also suitable for cementitious mortars and concrete while they are still soft
• Release agent: EST-Desmoldeante is the system release agent for molds and rollers; it prevents the mortar from sticking
Complementary materials
• EST-Desmoldeante: release agent for molds and rollers
• EST sprayer: to apply the release agent
• Wire brush: to clean the stamp after use
• ESTonetex mortars: range of mortars that can be stamped
• Wood stamps: MM1 / MM2 / MM3 / MM4 / MM5 / MM6 / MM7 / MM8
• Wood rollers: RM1 / RM2 / RM3
• Roller, stamp and knot kits: KM1 / KM2 / KM3
• See the full wood and trunk texture molds category and the rock and stone texture molds
Frequently asked questions
What is N3 used for?
To reproduce a triple knot on soft mortar, as a complement to wood and beam textures.
What size is it and what is its reference?
It measures 10 × 34 cm, is semi-flexible and its reference is 2015.
Is it rigid or flexible?
According to the catalog, N1 and N2 are rigid and N3 is semi-flexible.
How does N3 differ from the other knots?
Size and shape change: N3 measures 10 × 34 cm. Other knots: N1 (4 × 4 cm, rigid, tree knot) and N2 (8 × 14 cm, rigid, tree knot).
Can it be used on its own or does it need to be combined?
It is used as a complement: the catalog offers kits combining roller, stamp and knot to create wood and beam textures (KM1 / KM2), and it can also be used with individual stamps and rollers.
Which release agent should be used?
EST-Desmoldeante is recommended, sprayed onto the mortar and onto the stamp, while the mortar is still soft.
How is it cleaned?
Always after use, with a wire brush.
👉🏻 Remember that our shop is a DIGITAL CATALOGUE. You can request a quote if you are in Spain, or find our official international distributors.
Solicitud de presupuesto
-- or --