Staples for manual stapler

Applications

•  Fixing fibreglass mesh onto rods with a manual stapler

Technical specifications

Data according to the Estecha 2026 catalogue. For any additional technical information, please get in touch through the contact form.

What meshes are they used with?

They are used to fix, onto rods, the 220 g/m² or 330 g/m² meshes, which are the ones used on iron-rod structures for artificial rocks and waterfalls. ESTonetex System mortars such as TXT, Park, Sulfo or Extreme are then applied over the fixed mesh. These are the meshes:

•  220 g/m² mesh (REF 1306): 50 m by 1 m roll (50 m²). Covering for iron-rod structures in the creation of artificial rocks and waterfalls; also reinforcement mesh in the lower areas of walls and façades.

•  330 g/m² mesh (REF 1305): 25 m by 1 m roll (25 m²). Covering for iron-rod structures in the creation of artificial rocks and waterfalls; also reinforcement mesh in the lower areas of walls and façades.

How are they used?

The staples are loaded into the manual stapler and fired to fix the mesh onto the rods. Before using them, check that the stapler accepts A20 type staples and follow the stapler manufacturer's instructions. The spacing between staples depends on the project.

Observations and precautions

Professional product. Wear gloves and safety goggles when stapling.

Complementary materials

•  330 g/m² mesh: mesh for iron-rod structures in artificial rocks and waterfalls

•  220 g/m² mesh: mesh for iron-rod structures in artificial rocks and waterfalls

Frequently asked questions

What are A20 staples?
They are galvanised ring staples for manual staplers, used to fix fibreglass mesh onto rods. They come in boxes of 1,000 units.

How many staples are in a box?
Each box contains 1,000 units.

What is the difference between A20 and RT-C23 staples?
Both are galvanised ring staples for fixing mesh, but each is meant for a different type of stapler: A20 for manual staplers (boxes of 1,000 units) and RT-C23 for pneumatic staplers (boxes of 10,000 units).

Do they fit any manual stapler?
They are designed for manual staplers. Before using them, check that your stapler accepts A20 type staples; if in doubt, contact us.

Which mesh should I choose to fix with these staples?
For iron-rod structures, the 220 g/m² or the 330 g/m² mesh. The other meshes in the range are not used for this purpose.

How many staples do I need per m² of mesh?
There is no single figure: it depends on the mesh, the substrate and the project. Contact us through the contact form and we will advise you.

Which mortar is applied over the stapled mesh?
Over the mesh fixed to the rods, theming mortars such as TXT, Park, Sulfo or Extreme are applied.