Stone roller kit KPR1

Applications

•  Creating stone and rock textures on moldable ESTonetex mortars, cementitious mortars and concrete

•  Theming work and creation of textures in high-end decoration

•  Combining the big and the small roller to work large surfaces and detail areas

Technical specifications

This product has no technical data sheet: for any question about sizes, texture or compatibility, request information.

How is it used?

1. Spread the mortar over the surface to be textured.

2. Using the EST sprayer, apply EST-Desmoldeante onto the mortar and onto the rollers, until the surfaces are completely covered.

3. While the mortar is still soft, roll the roller over the surface, section by section, to imprint the texture.

4. Always clean the rollers after use, with a wire brush.

According to the EST-Desmoldeante technical data sheet: waiting times vary with temperature and humidity; the release agent application temperature must be between 5 and 35 ºC; do not use if the mortar has excess water, do not add water once it has been sprayed and do not apply if there is a risk of frost, rain, strong winds or direct sun; wear gloves.

Compatibility

•  Moldable ESTonetex mortars: ESTonetex TXT (compatible with stamps according to the catalog), ESTonetex Park (compatible with molds), ESTonetex Sulfo and ESTonetex Extreme (carving and stamping) and ESTonetex Pavimento (anti-slip finish through texture or stamping). All of them in ESTonetex mortars

•  Other mortars and substrates: also suitable for cementitious mortars and concrete while they are still soft

•  Release agent: EST-Desmoldeante is the system release agent for molds and rollers; it prevents the mortar from sticking

Complementary materials

•  EST-Desmoldeante: release agent for molds and rollers

•  EST sprayer: to apply the release agent

•  Wire brush: to clean the stamp or roller after use

•  ESTonetex mortars: range of mortars that can be stamped

•  L stamps (rigid, plastic handle): L1 / L2 / L6 / L7 / L9 / L10

•  MR stamps (semi-flexible, plastic handle): MR1 / MR2 / MR3 / MR4

•  MP stamps (fabric handle): MP1 / MP2 / MP3 / MP4 / MP5

•  MF stamps (flexible, silicone handle): MF1 / MF2 / MF3 / MF4 / MF5

•  Roller and stamp kits: KP1 / KP2 / KP3 / KP4

•  See the full rock and stone texture molds category

Frequently asked questions

What does KPR1 include?
It includes a big roller of 26 × 12 cm and a small roller of 24 × 7 cm. Reference 2127.

How does KPR1 differ from the RT01 and RT02 rollers?
The sizes of the two rollers in KPR1 match those of the individual rollers RT01 (26 × 12 cm) and RT02 (24 × 7 cm), all of them stone and rock texture rollers; the kit offers them together under a single reference. RT01 / RT02.

How does it differ from the KP kits?
The KP kits combine a roller and a stamp with a fabric handle (KP1 / KP2 / KP3 / KP4); KPR1 combines two rollers, a big one and a small one, and does not include a stamp.

What textures is the kit for?
According to the catalog, for texturing stone and rock.

Which release agent should be used and when is it applied?
EST-Desmoldeante is recommended, sprayed onto the mortar and onto the rollers, while the mortar is still soft.

Which mortars can it be used with?
With moldable ESTonetex mortars such as ESTonetex TXT, ESTonetex Park, ESTonetex Sulfo, ESTonetex Extreme or ESTonetex Pavimento, and with cementitious mortars and concrete while they are still soft.

How are the rollers cleaned?
Always after use, with a wire brush.