Multifunctional consolidator of lithium silicate modified with colloidal silica for mineral bases, its application in restoration of historical heritage, restoration of facades and bio-construction is recommended.
Multifunction lithium silicate consolidant for mineral bases, for bio-construction work, rehabilitation of facades or restoration of historical heritage.
-The standard container is 1, 5 and 10 L.
-Mineral consolidant with lithium silicate and colloidal silica, thanks to its petrification process by multiple silicification, it reacts with the mineral base forming the same crystalline body, insoluble in water and highly breathable. So it is highly recommended in bio-construction and for rehabilitation and restoration of Historical Heritage, concrete and all kinds of mineral bases.
-The most recommended is to use it with a spray, although it can also be used with a brush or brush.
-The recommended solution is 1 part of EST-Multilithium for 4 parts of water.
-The base where it is intended to be used must be clean and dry.
Recommendations for use:
-Do not apply on icy surfaces or with a risk of snowfall in the 24 hours following the application of the product.
-It is not recommended to apply it in areas where the sun touches a lot.
How to use:
-Apply from the material directly (concrete) to a 1: 4 solution in water (especially in restoration), with a brush, roller, Sprayer-EST. Although the degree of dissolution and hands is variable. As a general rule (in restoration) it is advisable to apply a first coat more dissolved in water (1: 4), especially in low-absorption, low-porous mineral bases, to later apply a final second coat.
-Recommended application temperature, from 5 to 30 ºC.